|
INPUT |
|
Connections |
2x XLR and 2x RCA |
|
Balanced input Impedance |
94 kΩ |
|
Unbalanced input Impedance |
47 kΩ |
|
Maximum Input Level (input Bal) |
7.2 Vrms |
|
Maximum Input Level (input Unbal) |
3.6 Vrms |
|
Grounding
Two possible modes selectable by a switch on the rear panel) |
Grounded : Signal ground connected to earth
Lifted : Separated ground and earth signal |
|
OUTPUT |
|
Connections |
XLR or RCA |
|
Maximum Output Level (input Bal) |
6.2 Vrms |
|
Maximum Output Level (input Unbal) |
3.1 Vrms |
|
Frequency range (+0dB, -0.1dB) |
5Hz to 24kHz |
|
Frequency range (-3dB) |
0.7Hz to 330kHz |
|
THD+N |
< 0.0014% (-97dB) @ 1kHz |
|
Gain balanced max |
18 dB |
|
Gain unbalanced max |
24 dB |
|
Clip to Noise Ratio |
-105 dB |
|
Gain unbalanced |
32 dB |
|
Gain Balanced |
26 dB |
|
Output impedance Balanced |
200 Ohm |
|
Output impedance Unbalanced |
100 Ohm |
|
TECHNILOGY USED |
|
Three Pre-configured input gain 0dB, +5.85dB or +11.88dB corresponding to the High, mid or low input level |
|
Adjustment ranges from -120dB to +6 dB in steps of 1dB |
|
Real dual mono topology |
|
|
Purely resistive passive component attenuator without any feedback loops or semiconductor components |
|
Class A type output current buffer |
|
|
POWER |
|
Nominal line voltage |
100Vac, 115Vac or 230Vac |
|
Input voltage range |
+/-5 % |
|
Maximum power consomption |
50W |
|
Standby consomption |
Less than 1W |
|
SIZE & WEIGHT |
|
Height |
100 mm |
|
Depth |
420 mm |
|
Width |
440 mm |
|
Weight |
14.2 kg |
|
SAFETY FEATURES |
|
Automatic switching to MUTING if the AC line drops or is interrupted. |
